Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Sunnyside?
Garage door work in Sunnyside typically runs $150 – $600 for repairs, with most single-issue visits landing in the lower half of that range. A new door installation is a bigger project, typically estimated at $700 – $2,200 depending on door size, material and hardware. Every price we give is an estimate set per job by a written quote, so what you see here is a planning range, not a final bill.
We connect homeowners in Sunnyside with independent local professionals who work on the brand you already own, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. Call (888) 912-7130 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician to most Sunnyside addresses the same day.
Key Takeaways
- Typical garage door repair in Sunnyside: $150 – $600.
- One spring: $180 – $340. A matched pair usually goes together, so budget about twice that.
- New door installation: $700 – $2,200, estimated per job.
- Estimates are free, and the written estimate sets the final price.
- Parts are sourced and supplied directly, so jobs don’t stall waiting on a third-party order.
Garage Door Cost Breakdown (2026)
These are typical estimated ranges for the Sunnyside market in 2026. They cover the common residential jobs and reflect what a written estimate for each one usually looks like.
| Service | Typical estimated range | Notes |
|---|---|---|
| Spring repair (one spring) | $180 – $340 | A matched pair is usually replaced together, about twice this range |
| Cable repair | $130 – $250 | Often booked alongside spring work |
| Opener repair | $120 – $320 | Covers LiftMaster, Chamberlain, Genie and Craftsman units, smart systems included |
| Opener installation | $250 – $550 | New unit supplied and fitted |
| Panel replacement | $250 – $500 | Clopay, Amarr, Wayne Dalton and Raynor panels |
| Track realignment | $120 – $240 | For a door that has jumped or bent its track |
| Roller replacement | $110 – $220 | Quieter operation and smoother travel |
| New door installation | $700 – $2,200 | Size, material and hardware drive the spread |
| Full repair visit (general) | $150 – $600 | The lead range for this page |
What pushes a job toward the top of its range? A single spring is cheap next to a pair, and most doors with a broken spring get both replaced at once. A snapped cable on a door that also has worn rollers turns one repair into two. On the installation side, a double-car door in a heavier insulated panel costs more than a single door in a basic steel model, and any structural work around the opening adds to the estimate. Opener jobs vary with the unit: replacing a stripped gear in an older Craftsman unit sits near the bottom, while fitting a new Wi-Fi connected LiftMaster or Chamberlain opener with new rails and safety sensors sits near the top.
What Affects Garage Door Pricing in Sunnyside
Sunnyside sits in the Denver metro, and a few local realities show up in the estimate.
- Door size and material. A single-car door and a double-car door are different jobs. Steel is the most common choice here, and insulated panels or wood-look facing move the price up on installation.
- Which parts have failed. One broken component is a straightforward repair. A door with a dead spring, a frayed cable and worn rollers is a same-visit combination job, and the estimate reflects each part.
- Brand and parts availability. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, and parts are sourced directly rather than ordered through a third party. That keeps jobs moving and cuts the waiting that inflates some quotes.
- The seasonal swing. Front Range winters bring hard freeze-thaw cycles, and the constant cycling of a door in cold weather is rough on springs and on the opener’s drive. A door that has gone through several winters tends to need more than one part at a time.
- Openers and smart hardware. Older manual units are simple to service. Modern connected openers from LiftMaster and Chamberlain need a technician who knows the electronics and the app setup, not just the mechanical side.
- Whether it’s repair or replacement. A door that’s been patched several times can reach the point where a new installation makes more sense than another repair. The estimate will lay out both so you can compare.
How to Save on Garage Door
The biggest lever is timing. A door that gets a small roller or track fix early avoids the larger bill that comes when a bent track starts chewing through cables and springs. If something sounds wrong, grinding or scraping, it’s cheaper to have it looked at than to wait.
Second, ask for a written estimate before any work starts and have the technician explain each line. You’ll see whether you’re paying for one spring or a pair, and which parts are genuinely needed.
Third, don’t put off opener problems. A unit that’s straining or reversing without reason puts extra load on the door hardware, and a small opener repair in the $120 – $320 range is a lot less than a combined opener-and-spring job later.
Fourth, when a door is genuinely at the end of its life, compare a new installation against repeated repairs. Replacement estimates in the $700 – $2,200 range include the door itself, and a newer insulated door also quiets the whole assembly.
Estimates are free. Call (888) 912-7130 and we’ll book a time that works for you. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Garage Door Cost
How much does garage door repair cost in Sunnyside?
Garage door repair in Sunnyside typically runs $150 – $600, depending on how many parts have failed. A single spring is $180 – $340, cable repair is $130 – $250, and opener repair is $120 – $320. Call (888) 912-7130 for an exact quote. Estimates are free.
How much does a new garage door cost in Sunnyside?
A new door installation in Sunnyside is typically estimated at $700 – $2,200. The spread comes from door size, material and hardware, with a single steel door near the bottom and a larger insulated or wood-look door near the top. Call (888) 912-7130 to talk through your options and get a written estimate.
How much does spring repair cost, and do I need one or two springs?
Spring repair is $180 – $340 for one spring. Most doors use a matched pair, and when one breaks the other usually isn’t far behind, so a pair is commonly replaced together at roughly twice that range. The technician will show you the condition of the second spring so you can decide. Call (888) 912-7130 for a free estimate on a pair.
Can you come today, and does Saturday cost extra?
Same-day service is often available in Sunnyside. We’re closed Saturday and open Sunday through Friday, 7am to 7pm, and the price is set per job by the written estimate, never by the day or hour. Call (888) 912-7130. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper when one or two parts have failed: a $180 – $340 spring job or a $120 – $320 opener repair is far less than a new door at $700 – $2,200. Replacement makes more sense when panels are badly damaged, the door is hard to source parts for, or repairs have become a yearly event. Call (888) 912-7130 and the technician will give you both numbers in writing so you can compare.
What Happens When You Call
You call (888) 912-7130, describe what the door is doing, and we book a visit. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. The technician comes out, diagnoses the actual failure, and gives you a written estimate before touching anything. Because the local professionals work across the full system, doors, openers, springs and parts, a job rarely needs a second company or a second visit. And when a door has reached the end of its life, the same visit can cover a replacement estimate so you’re not starting over.
For spring and cable failures specifically, we don’t talk anyone through doing it themselves. High-tension springs and cables store serious energy and a mistake can cause real injury, so they need a trained professional with the right tools. That’s work we take on through the local professionals we connect you with, and it’s the reason we include it as part of the full-service offering rather than sending you elsewhere. For more on the emergency side of things, see our page on garage door repair Park Hill.
If you’re comparing a repair against putting money toward a new door, it helps to think about what the door is doing over a whole season, not just today. A properly adjusted door with sound springs, straight tracks and fresh rollers runs quietly and puts less strain on the opener. That combination is usually the cheapest thing to own. A door that’s constantly out of adjustment, with a rough-running opener and mismatched hardware, tends to cost more each year until it’s replaced.
Cost is set per job by the written estimate, and the estimate is free. Call (888) 912-7130 to book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 9 years of experience across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor equipment, and parts are on hand so you’re not waiting on an order to get your door working again.
Pricing reflects the Sunnyside market as of 2026. Garage Door Repair Park Hill offers free estimates – call (888) 912-7130.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Tariq Aziz"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Cole Hayes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Mark Meyer